1STPLAYER B5-M computer case Micro Tower Black

FD-CA-CORE-1100-BL

KLM-002

KLM-003

0-761345-81042-5

DP-MATX-MATREXX30-SI

Despite its extremely small outer dimensions, the Core 1100 mATX case provides everything you need. The stylish, Scandinavian exterior design is matched by the fully painted interior, complete with the signature white details of Fractal Design. The case is optimized for airflow with a straight cooling path, and comes equipped with a pre-installed 120mm fan. The front panel is equipped with dust filters. An innovative vertical hard drive bracket can fit either two 3.5" drives, three 2.5" drives, or one drive of each size. Both the 3.5" drive slots come with silicone vibration dampening grommets

Kolink is expanding their range of cases with the addition of a new, compact, as well as high-performance case that is designed for use in schools as well as offices. Get ready for the Micro-ATX KLM-002: in terms of pure flexibility bearing in mind the dimensions, this case is a force to be reckoned with. Depending on your space requirements, the case is designed for horizontal or vertical use. The interior allows for up to three 2.5" drives to be installed. A pre-installed 80mm fan helps ensure more than adequate cooling. Kolink KLM-002: The Compact Case for Schools and Offices With a height/width of just 9.5cm the Kolink KLM-002 is exceptionally compact and can be set to the orientation you prefer depending on the space available with the help of an included stand. All told, this makes the KLM-002 an outstanding choice for use in spaces with large numbers of systems such as offices and schools. Despite the compact dimensions however, the KLM-002 is built to support a large amount of hardware regardless. The case supports Micro-ATX- and Mini-ITX form factor motherboards. As for graphics cards, 9.5cm of space is available, although the case is ideally suited for use with CPUs that include and integrated GPU. If you do require the extra gaming horsepower however, a low-profile GPU with a max length of approx. 150mm can be installed. Hard Drives & SFX Power Supply Support With air vents on the back, sides and roof, the case is designed from the ground up with airflow in mind, helped by the presence of a pre-installed 80mm fan. On the interior, a total of three 2.5" drives can be installed, and alternatively a 3.5"- and a 2.5" drive are also supported. A compact SFX-form factor power supply is required due to the dimensions of the case, this points outwards from the bottom of the case when set vertically. An angled kettle cable must be used so that the cable can be guided out towards the rear. Functionality aside, the appearance of the KLM-002 cuts no corners either. The front has the appearance of brushed aluminium. The I/O panel is also located on the front, offerings a USB 3.0- and two USB 2.0 ports. Two 3.5" jacks for headphones and microphones are available. The power switch is mounted to the side along the edge of the case's front cover.

Featuring a compact size and cost effective design, the Kolink KLM-003 Micro-ATX Case provides a strong solution for business and home office use. The KLM-003 features an attractive brushed aluminium effect front panel with side venting and a 5.25 drive bay, with internal support for up to a 300mm VGA card & 150mm CPU cooler, alongside ATX power supplies.

Kolink KLM-003: Compact yet functional

The KLM-003 Micro-ATX case is designed to provide a small footprint within your office or home setup. The dimensions are just 365 x 184 x 345 mm in total, however there is plenty of room for your hardware. Graphics cards up to 300mm can be installed, alongside 150mm CPU Coolers and ATX Power supplies. Both Micro-ATX and Mini-ITX motherboards are supported.

Storage; cooling covered

The KLM-003 Micro-ATX case is designed to provide a small footprint within your office or home setup. The dimensions are just 365 x 184 x 345 mm in total, however there is plenty of room for your hardware. Graphics cards up to 300mm can be installed, alongside 150mm CPU Coolers and ATX Power supplies. Both Micro-ATX and Mini-ITX motherboards are supported.

Storage & cooling covered

The KLM-003 has space for either 2 x 3.5 HDD's or 3 x 2.5 SSD's. There's up to 16mm of cable management space available behind the motherboard tray for more effective routing of power supply cables and there's also space for a 5.25 device such as an optical drive. A 80mm fan is installed at the rear as standard, with space for a 120mm fan available on the side panel.

Functionality aside, the KLM-003 offers a simple yet attractive look with solid steel side panels and a brushed aluminium effect front panel design. The I/O panel is located on the top panel & sports a USB3.0 port, alongside a USB2.0 port. Two 3.5 jacks for headphones and microphones are available, along with the power button.

Creation of Value & Function The NX410 Black/White mid-tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes one ARGB LED fans in both front and rear. With support for up to a 360 mm liquid cooling radiator in front and 280 mm on top, NX410 Black/White is easy to build with and easy to cool. LED Control Button Just a single press to change the front panel’s ARGB lighting effect at will. Supports up to 6 fans

MATREXX 30 SI
COMPACT M-ATX CASE FOR SOLID PERFORMANCE

Matrexx 30 SI is small-sized M-ATX computer case, perfect for gamers looking to build a small gaming PC. Its logical interior structure maximizes compatibility.

The classic M-ATX structure (dimensions 420 x 201 x 365mm) is compatible with M-ATX and ITX motherboards
Small and compact but with plenty of capacity

Utilizing honeycomb front air intake design, supports 120mm radiator/fan in the front, pre-installed 120mm black fan in the rear, Matrexx 30 SI guarantees your performance and aesthetic needs

Classical steel side panel provides an elegant and minimalist visual

Compatible with graphics cards up to 250mm

The ridge on the back panel provides 14.8 mm of space for cable management

The lower power supply design allows unhindered airflow for heat dissipation

The top panel is fitted with USB ports, headphone jack, and switch for easy access

Micro-ATX, Mini ITX, 2 x 5.25", 2 x 3.5"/2.5", ATX PSUs, USB 3.0, USB 2.0

Micro-ATX, Fan 80 mm, USB 3.0, USB 2.0, Audio In/Out, Horizontal / Vertical orientation, 3.5" - 2.5" drives, 2.5 kg, Black

Micro-ATX Case, 5.25 Drive Bay, with space for 2 x 3.5 HDD's or 3 x 2.5 SSD's

ATX, Micro-ATX/ITX, 2x USB 2.0, 1x USB 3.0, 2x 3.5", 3x 2.5", White

Mini Tower, ABS+SPCC, 3x 3.5", 2x 2.5", 5.25", USB3.0, Audio in/out, ATX PS2, 405.8 x 193 x 378.2 mm, 3.62 kg

Fractal Design

Kolink

Kolink

Antec

DeepCool