My Cart
You have no items in your shopping cart.
SKU | DN-14001-2 |
---|---|
EAN | 4016032498346 |
Manufacturer | Digitus |
Availability | In Stock |
Product |
![]()
£20.33
£16.94
|
![]() Popular
Microconnect CAB-TEST4 network cable t...
£20.24
£16.87
|
![]() Hot Product
LogiLink WZ0017 network cable tester P...
£19.97
£16.64
|
![]()
£18.72
£15.60
|
![]() Bestseller
Digitus Network and Communication Cabl...
£26.39
£21.99
|
![]() Recommended
Cablenet RJ45/RJ11/BNC/USB Continuity...
£23.42
£19.52
|
---|---|---|---|---|---|---|
SKU |
DN-14001-2
|
CAB-TEST4
|
WZ0017
|
WZ0015P
|
DN-14001-1
|
87-3551
|
Description |
Future-oriented standards and high-end quality for your network.
- Compatibility: supports CAT 5, CAT 5e, CAT 6, and CAT 6A cables - Modularity: main unit and remote module allow easy testing over long cable runs - POE: PoE test to determine voltage and power on PoE-enabled ports (IEEE 802.3af/at) - Protection: shock and splash protection thanks to robust housing. - User-friendliness: Simple operation with clearly understandable display and signal tone in the event of errors. - User-friendliness: Color-coded LEDs or graphical display for test results Intelligent, fast and intelligent state tester for connection of telephone and network harness. Check the connection between RJ45 connector and wire-harness. Accurately determine which end of the RJ45 connector is connecting with the network line. It perfectly solves the problem that the ordinary tester cannot determine two water. In the end, the RJ45 connector is not connected at that end, so as to save time. |
Network tester for RJ 11/12/45
Data cable Analyzer for continuity checks. Allows easy identification of interruptions or interchanges. - for CAT 5/6 network and ISDN connection tests - connection test with LED indicators for 8 single lines and screening - powered with 9 V batterie (not included) |
- Test for already installed or bulk HDMI cables
- With 2 HDMI A plugs - Simple one button test - Ergonomic portable handheld design - LEDs indicate connections and faults - Power: 9V battery block (not included) - Optical and acoustical signals The HDMI Cable Tester from LogiLink with the associated remote unit to test a complete line after the installation. Easy to use via LED lights and audible signals. The unit checks all pairs and shielding. |
LogiLink’s Network Cable Tester is the best choice for budget oriented installers and service engineers. With this tester, the installer finds any basic cabling problem very quickly. This cable tester has many features; basically it is ideal for testing cables including Cat5, Cat6, Cat7 as well as Coax and Telephone cables. LogiLink’s Network Tester is suitable for RJ45, RJ11, RJ12 and BNC connectors. This set is equiped with LogiLink’s POE finder which reviews and determines if a network cable or port is providing Power-over-Ethernet or not. The POE-Finder indicates whether the PoE is active on the endspan (1-2/3-6) or midspan (4-5/7-8) pairs.
|
Future-oriented standards and high-end quality for your network.
- Check network cables quickly and easily - Loop test, remote test, PoE test - includes adapter for BNC cable tests - Read results easily via LED indicators - Automatic or manual test possible - with hard shell case The LAN tester makes it easy to identify the correct PIN assignment of 10Base-T, 10Base-2, RJ45/TM11 modular cables as well as 258A, TIA-568A/568B and token ring cables by comparing the outgoing cable end with the corresponding receiving cable end. With the remote tester, you can test cables that are installed at a different location, for instance in wall distributors or patch fields. Easy identification of cabling is guaranteed. |
The Multi-protocol Cable Tester is a Remote Cable Tester, palm sized unit with four types of connector: RJ45, RJ11, USB and BNC.
This unit can be used to verify the condition of cables both before and after their installation. The separate passive module is connected to the remote end of the installed cabling.Easy operation - simply press the button. Multiple LEDs give a clear indication of the following: Open/short wiring, Connected wires, No connection/no terminator, Wrong connection/non-parallel connection. USB Ports: The Master Unit has a USB Series B connector and the Remote module has a Series A connector. |
Short Description |
Cable tester, network, RJ45, Single side tester main device, remote unit, PoE tester, with case
|
Cable Tester RJ-11/12/45, CAT 5/6, LEDs
|
Cable Tester for HDMI Cable, with Master + Remote Unit
|
USB 3.2 Gen1 Type-C adapter, C/M to USB-A/F, OTG, silver
|
Cable tester, network, RJ45, BNC main device, remote unit, PoE tester, with case
|
Remote Cable Tester RJ45 RJ11 USB and BNC
|
Manufacturer |
Digitus
|
Microconnect
|
LogiLink
|
LogiLink
|
Digitus
|
Cablenet
|