Description
|
Operating at speeds of up to 400Mbps, the Dynamode 3 port Firewire card is the ideal expansion card for connecting external high bandwidth devices such as; digital cameras, personal audio players, hard disks and camcorders. - FEATURES: - 1394 Standards Compliant IEEE 1394-1995, P1394a(rev1.1) and OHCI(rev1.0). - Data transfer: Asynchronous and isochronos data transfer at 100/200/400Mbps data rate. - Hot plugging, dynamic reconfiguring of up to 63 nodes on the bus, no need to turn off the system when adding or removing 1394 devices. - 3 fully independant ports to provide maximum peripheral connections. - 1 Internal FireWire interconnect Port for connecting to PC Case FireWire output port if required.
|
Dual FireWire™ and USB connectivity for Notebooks.
Is your existing Notebook or Desktop without the necessary next generation Ports to allow attachment to FireWire™ 1394a products such as the latest A/V equipment, or have you run out of existing high-speed USB 2.0 ports on your portable?
Introducing the new Dynamode PCMX1U2FW dual FireWire™ and single USB 2.0 adapter, designed for the class-leading ExpressCard™/34 slot. The replacement for the current PCMCIA standard, ExpressCard™ technology couples the higher bandwidth performance of PCI Express including much higher transfer rates of around 3Gbps needed for today’s high-speed storage and data transfer devices such as external A/V and storage devices.
|
Dual high-speed FireWire™ connectivity for Notebooks.
Is your existing Notebook or Desktop without the necessary next generation Ports to allow attachment to FireWire™ 1394a products such as the latest A/V equipment, Backup devices or other high-speed devices found on products today?
Introducing the new Dynamode PCMX2FW dual FireWire™ 1394a adapter, designed for the class-leading ExpressCard™/34 slot. The replacement for the current PCMCIA standard, ExpressCard™ technology couples the higher bandwidth performance of PCI Express including much higher transfer rates of around 3Gbps needed for today’s high-speed storage and data transfer devices such as external A/V devices and external Storage products.
|
No
|
Need a redundant, RAID 0, 1, 0+1 ATA/133 PCI Controller Card for your Server or mission critical-based hardware?
Introducing the new PCI-ATA133 low-cost Controller card for all your Desktop, Server and other high-availability storage systems. Full 32-bit PCI 2.2 compliant, this feature-rich Controller card supports software RAID 0 (striped), RAID 1 (mirror) and RAID 0+1 with the additional ability for HDDs with different sizes to be configured into a RAID set. Featuring full backward compliance with legacy storage systems including Ultra ATA/66, Ultra ATA/33, EIDE and IDE support for common ATAPI devices including DVD-ROM, LS-120, Tape and ZIP storage drives, the Controller card offers full Plug n' Play compliance with leading Operating Systems.
|
Connect a CF card to a computer through an IDE connector This Compact Flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection. Designed and constructed to provide a reliable media card platform, the CF IDE adapter is backed by StarTech.com''s 2-year warranty. The StarTech.com Advantage - Quick and driver free installation into any IDE 40 pin and 44 pin slot - Easily swap cards in and out with built-in push button ejector
|
Short Description
|
PCI IEEE 1394 (Firewire) Card
|
Dual FireWire and single USB card adapter, ExpressCard 34mm
|
Dual FireWire card adapter, ExpressCard 34mm
|
2-port eSATA adapter, ExpressCard 34mm
|
2-port high-performance RAID PCI card
|
3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader
|