| Maximum data transfer rate | 100 Mbit/s |
|---|---|
| SKU | MCM110SC2GB |
| EAN | 0065030836524 |
| Manufacturer | StarTech.com |
| Availability | In Stock |
| Product |
New
StarTech.com 10/100 Ethernet to Multi...
£61.54
£51.28
|
Hot Product
Allied Telesis AT-SPSX network media c...
£54.02
£45.02
|
Popular
Allied Telesis 100TX to 100FX (SC) sta...
£88.61
£73.84
|
Recommended
StarTech.com 10/100 Multi Mode Fiber C...
£65.86
£54.88
|
Digitus Gigabit Media Converter, RJ45...
£73.52
£61.27
|
Bestseller
Digitus Gigabit Media Converter, RJ45...
£75.13
£62.61
|
|---|---|---|---|---|---|---|
| SKU |
MCM110SC2GB
|
AT-SPSX
|
AT-MC102XL
|
MCM110ST2GB
|
DN-82110-1
|
DN-82120-1
|
| Description |
This Ethernet to MM Fiber Media Converter creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance and scalability.
|
The AT-SPSX offers a short-haul option to extend your network to 550 m.
|
Fibre connections
The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre. Auto-negotiation and MissingLink™ The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost. Simple installation Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment. Standalone or rackmounted Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. |
Convert and extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber
This Ethernet to MM Fiber Media Converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance and scalability. Easy to setup and install, this compact, value-conscious media converter features auto-switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full and Half Duplex, as well as LFP (Link Fault pass-through) on/off. The StarTech.com Advantage |
The perfect converter solution for various fiber media
- Sends data in high quality and additionally provides excellent reliability - Automatic cable detection - Over a distance of 500m transmits the converter in Gigabit speed The media converters from DIGITUS® are the ideal solution for the migration of copper and fiber network signals. From now on, you are able to access the fiber technology and transfer network signals over several kilometers without renewing your whole network infrastructure. The huge variety of products fulfil your individual needs. The intiutive operation guarantees a quick and easy installation. Years of experience and a wide range of products lets DIGITUS® become a reliable partner for your network. |
The perfect converter solution for various fiber media
- Distance up to 0.5km - Sends data in high quality and additionally provides excellent reliability - A quick delivery is guaranteed in the gigabit range The media converters from DIGITUS® are the ideal solution for the migration of copper and fiber network signals. From now on, you are able to access the fiber technology and transfer network signals over several kilometers without renewing your whole network infrastructure. The huge variety of products fulfil your individual needs. The intiutive operation guarantees a quick and easy installation. Years of experience and a wide range of products lets DIGITUS® become a reliable partner for your network. |
| Short Description |
Ethernet Fiber Media Converter
|
SFP Pluggable Optical Module, 1000SX, 220m/550m, Multi mode, Dual fiber [Tx=850,Rx=850], LC conn. (0 to 70°C)
|
100TX to 100FX (SC) standalone media converter
|
StarTech.com 10/100 Multi Mode Fiber Copper Fast Ethernet Media Converter ST 2 km - UTP to 100Base-Fx - Fiber Optic Media Converter MM (MCM110ST2GB)
|
Gigabit Ethernet Media Converter, Multimode ST connector, 850nm, up to 0.5km
|
Gigabit Ethernet Media Converter, Multimode SC connector, 850nm, up to 0.5km
|
| Manufacturer |
StarTech.com
|
Allied Telesis
|
Allied Telesis
|
StarTech.com
|
Digitus
|
Digitus
|
