|
Description
|
The RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter increases the number of RJ45 network connections on an RJ45 outlet, allowing two 10/100 Ethernet signals through a single Cat5/Cat5e wire.
On one end of the installation the splitter enables you to connect two patch cables from a hub or switch to a single port on a patch panel; while on the other end of the installation the splitter connects to a single Cat5/Cat5e network drop through a wall outlet which can then be split and connected to two separate devices. The patch panel and wall outlet are connected through a single Cat5/Cat5e cable.
Designed and constructed for maximum durability, this Ethernet Splitter Cable is backed by StarTech.com's Lifetime Warranty.
|
TP-LINK’s PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard. It can receive power and data from all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Injector, such as TP-LINK's TL-SG3424P, TL-SF1008P, TL-POE150S or other equivalent products, then split electric power and data into two cables, so you can install the non-PoE devices like Wireless Access Points, IP Cameras or IP Phones, in remote location where there are no power lines or outlets, where you wish to fix these devices.
|
The MC-POESPLITTER PoE Splitter delivers reliable power and data connectivity to your non-PoE devices. Designed to split a Power over Ethernet (PoE) signal into separate power and data sources, this splitter outputs 5V at 2.4A, making it ideal for powering a wide range of devices such as IP cameras, wireless access points, and other network appliances. Benefit from simplified installations by eliminating the need for separate power supplies. MicroConnect's pioneering innovation ensures a cost-effective and efficient solution for extending your network's reach while adhering to the highest European quality standards. Trust in our 20+ years of expertise to provide seamless integration and dependable performance for all your networking needs.
|
LogiLinks shielded modular splitter splits the existing RJ45 port into four RJ45 ports. LogiLink passive port-multiplier is suitable for network and telephone cabling. The durable ABS plastic housing has integrated circuit board for reliable connections, all ports are fully populated.
- Weight: 40g
- Modular splitter for Lan or telephone
- 4 x RJ45 female jack, shielded
- 1 x RJ45 plug with 15 cm cable
- Color: black
|
The PoE Splitter POE10R (TL-POE10R) fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SF1008P or POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.
|
|
Short Description
|
StarTech.com 2-to-1 RJ45 Splitter Cable Adapter - F/M
|
IEEE 802.3/802.3u/802.3ab/802.3af, 10/100/1000Mbps, PoE
|
PoE Splitter, 5V 2.4A
|
Passive RJ45 splitter, 4-port, shielded, with 15 cm cable, black
|
2× 10/100/1000Mbps RJ45, 100m max, 80.8x54x24 mm
|
