Description
|
Add an RS422/485 serial port to your system through USB; features COM port retention
The ICUSB422 6ft Professional RS422/485 USB Serial Cable Adapter with COM Port Retention lets you connect RS422 or RS485 serial devices to your USB-enabled computer. The adapter features a 9-pin (DB9) male serial connector as well as dipswitch controls for easy port configuration, and requires minimal software.
The serial adapter is USB-powered, eliminating the aggravation of requiring an external power adapter. With COM port retention, assigned port settings are saved, so you can disconnect and reconnect the adapter with virtually no configuration required on the host computer.
The ICUSB422 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
|
For connection to external loudspeaker and microphone systems (PA systems). If you use the PA interface box to connect to a PA system, there is no limit to the size of the meeting room.
|
This easy-to-use adapter enables Motorola MC9000 and MC9190-G mobile computers to communicate with a host PC system or printer.
|
This handy adapter establishes communication between a Motorola MC9000 series Mobile Computer and a host PC system or printer.
|
625mm OCuLink Cable kit AXXCBL625CVCX to connect to the 4 port switch
|
Supports EDID learning or Preset Emulation 15 Pre-set EDID modes with blocks for AV and PC applications Supports resolutions up to Ultra HD 4K 60Hz including HDCP 2.2 pass-through Powered via HDMI source interface 2 Year Warranty
The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM Extenders, Switches and Splitters.
The Emulator can solve a host of compatibility problems when using mixed equipment, especially extenders. With support for resolutions up to Ultra HD 4K 60Hz and with the ability to pass –through HDCP 2.2 content the Emulator is suitable for use with the very latest PC and AV applications.
Some computer systems, KVM switches and digital video signage systems may interrupt the flow of EDID data, or may not be able to pass this information directly back to the video card's output port. This adapter can be used to quickly and easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display, the cloning process takes less than 10 seconds!
It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.
Package Contents
HDMI 2.0 EDID Emulator
Lindy Manual
|
Short Description
|
StarTech.com 6ft (1.8m) 1-Port Professional RS422/485 USB Serial Cable Adapter with COM Retention, USB to RS422 Adapter - TAA
|
PA interface box
|
ADP9000-110R, f/ MC9000 & MC9190-G, Black
|
Cable Adapter Module
|
OCuLink Cable Kit AXXCBL625CVCX
|
HDMI 2.0 18G EDID Emulator
|