100m, HDMI, HDBaseT, Dolby Vision, Dolby Atmos, DTS-X, 6.84W, 136.4 x 74.2 x 15.2mm, 240g
Dynamic visually lossless compression enables extension of up to 4K/60 4:4:4 or HDR 60Hz content over HDBaseT
HDBaseT Class A transmission of 4K up to 70m/230ft, and 1080p up to 100m/328ft
Compatible with the latest HDR standards, including HDR-10+, HLG content, with support for Dolby Vision up to 30Hz
Supports all VESA resolutions within the HDMI 2.0 specification
Advanced re-clocking chipset increases compatibility with new 4K UHD source devices
Bidirectional IR and RS-232 pass-through
Supports CEC communication between devices
Slimline 21mm/0.83in chassis for easier, more convenient installation behind displays
2-way PoH (Power over HDBaseT) enabling either transmitter or receiver to be remotely powered by the other unit
Supports 2ch PCM and 7.1 multichannel audio up to DTS:X and Dolby Atmos
HDCP 2.2 compliant
Automatic EDID Management
Threaded bushings allow use of both standard and locking DC power plugs
Visual LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and HDBaseT link between devices
Automatically adjusts equalization and amplification of signal for easy installation
HDMI 2.0 MAXED OUT Knowing the speed at which technology moves, at WyreStorm we’re always looking ahead. That’s why we’ve implemented our VLC chipset (Visualy Lossless Compression) into this model meaning it’s ready for the next shift in content technology: 4K 60Hz 4:4:4 HDR.
HDCP 2.2 COMPLIANT The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-70-H2 supports the multi-point distribution of this content over HDBaseT.
SIGNAL RE-CLOCKING Installers shouldn’t experience problems because of source equipment they have no control over. That’s why all extenders in the WyreStorm H2 family automatically “re-clock” the source signal, overcoming clock-stretching issues found in certain source devices.
FLEXIBLE INSTALL OPTIONS WITH 2-WAY POH No 2 installs are the same; that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.
